Autowatch Ghost Immobiliser Installation
The Ghost is the UK's most advanced aftermarket immobiliser designed for CAN buses. It is discrete, does not use LED indicators or key fobs, and is hidden within the vehicle's wiring.
It also allows users to disable the system temporarily through Transport Mode in the event of renting out their vehicle. This guide will guide you through the process of installing a Ghost immobiliser.
Professional Installation
The Autowatch Ghost immobiliser protects your car from key hacking attacks, cloning and relay attacks. The system is connected directly to the ECU of your car and protected by a pin code you set. It's inaccessible to thieves using diagnostic scanners or other modern methods, and is not able to be disabled by cutting circuits.
The system is simple to use, however professional installation is recommended to ensure a smooth connection to the ECU of your vehicle. Installers who are approved by Thatcham can assist you with the installation and programming of your Ghost system. They can also recommend a tracking system or alarm to complement the protection package for your vehicle.
To prevent an accidental deployment of airbags or short circuits The installer must first disconnect your battery. After that the installer is now able to begin work. Basic hand tools are helpful to make precise connections, while a multimeter can be used to check electrical values and safety. Insulation tape and cable ties are also vital for protecting connections and keeping wiring tidy. The Ghost Immobiliser user manual will provide specific instructions specifically tailored to your specific model.
It is essential to choose a grounding location that is free of any paint or debris during installation. Installers must also ensure that the immobiliser's wires CAN H and the CAN L are connected to the proper ECU ports. The wires can be plugged into or soldered depending on the model. Using a quality connector is recommended to ensure a sturdy and reliable connection.
Transport Mode can be activated by the customer once the installation is complete. This allows the vehicle to be used by valet parking attendants or mechanics without needing to know the pin code. To accomplish this, the customer has to hit the service button on the dashboard five times within 2 seconds. The system will confirm this by showing 5 indicators.
The Autowatch Ghost 2 is a highly effective immobiliser that's TASSA certified and Thatcham approved. It's a smart option for anyone who regularly rents out their cars on platforms like Turo. Immobilisers can also lower insurance costs since it greatly reduces the chance of theft.
Getting Started
If you are looking for a solution to protect your vehicle from thieves it is best to go with an autowatch ghost immobiliser. The device protects your vehicle from being started even if a criminal steals or copies the key. It's possible because of its advanced technology, which prevents the engine from starting until the right PIN code is entered.
The device connects to the CAN bus network in your vehicle and allowing it to communicate with the ECU directly. It uses buttons that are already present on the dashboard and steering wheel to create a unique sequence only you know and makes it impossible for anyone else to start your car. This is the most secure way to protect your pride and joy. It will not lose its value in the event that you decide to sell it.
Installing a ghost immobiliser can be an easy process, however, it's important to follow the directions carefully to avoid problems with the electrical system and malfunctions. First, you must locate and identify a constant 12V power source and an appropriate grounding point on the vehicle's chassis. Then, you'll be able to begin connecting the wires to the immobiliser. Make sure to use high-quality connectors and soldering methods to ensure a strong connection. Make sure to shield the connections with heat shrink tubing or insulation tape, or other materials to avoid short circuits in electrical power.
After the wires are connected, you can connect the battery and start the engine to determine whether the immobiliser is functioning. After you've confirmed that everything is functioning properly and you are satisfied, you can place the immobiliser in a secure place inside the vehicle. Make sure to hide it properly to stop a thief from tampering with it.
The Ghost 2 immobiliser is TASSA (Tracker and Aftermarket Security System Association) verified, which means that it complies with the highest standards of security and is a fantastic deterrent to car thieves. try what she says offers superior protection against key cloning, hacking and relay attacks. It isn't able to be disabled unless you know the code. It is simple to use, and can be set up to the service valet setting to ensure that your vehicle won't be activated if you bring it for an MOT or servicing.
Wiring
The Ghost Immobiliser is a cutting-edge security system that is designed to stop theft of vehicles. It connects directly to your vehicle's CAN bus network and communicates with the ECU, making it virtually undetectable as an addition to your vehicle. Unlike other aftermarket systems that require the removal of circuit components the Ghost Immobiliser won't interfere with your vehicle's factory settings.
It's also completely undetectable to thieves using diagnostic scanning devices. This is because the system does not transmit and receive radio frequency signals, and it utilizes the CAN data to communicate with your ECU. Additionally, it doesn't require any modification to your car's existing key fobs.
To use the Ghost Immobiliser, simply turn on your car's ignition and then enter the sequence to disarm (either one or two buttons). The indicator will flash twice to confirm that you have entered the correct code. Now you can begin driving your car in a safe manner.
Once installed, the Ghost Immobiliser safeguards your vehicle against hacking or key cloning, while also protecting its value. If you ever have to hand over your vehicle to valet parking or for service, the Ghost Immobiliser can be temporarily disabled in Transport Mode.
To complete a Ghost Immobiliser installation, you'll have to identify a source of constant power (12V) and a grounding point. Be sure that both are well-insulated and can be touched. Cable ties are also suggested for bundling and securing the wires. This reduces the risk of theft by potential thieves. To avoid mistakes, double-check these points and mark them with the use of tape or labels. It's important to examine all connections for signs of wear and tear. Connectors that are loose could cause problems with the system, so be certain that they are securely in place and securely insulated. Don't forget to test your Ghost Immobiliser once the installation is completed. This will make sure that the unit is operating properly and that all connections and insulation are secure. Be sure to fix any problems immediately.
Testing
The Autowatch Ghost Immobiliser is an innovative vehicle security system that seamlessly into your car's ECU to block unauthorized engine start. Its innovative technology safeguards your vehicle from key cloning and hacking along with other methods commonly employed by thieves to steal cars. The Ghost works in conjunction with existing tracking and alarm systems to provide the best security for your vehicle. The Ghost's unique features and secluded design make it a preferred option for car enthusiasts and security-conscious motorists alike.
To ensure the proper integration of the Ghost Immobiliser, it is essential to follow all steps of the installation process. The best place to start is to refer to the wiring diagram for your vehicle that serves as a guideline for locating and connecting the necessary wires. Then, you'll need to identify the power source as well as grounding points. Once you've found them you'll need to mark them so that they're easy to identify during the installation process. In addition, it is important to use top-quality tools and materials. Hand tools are essential to aid in making precise connections. A multimeter can verify electrical values and guarantee security. Insulation tape and cable tie will keep all connections neat. Finally, a user manual will provide specific instructions specific to your Ghost model.
It is important to test the system prior installing it. Enter the PIN code into the system and start the vehicle. This will ensure that the immobiliser is working in the way it was intended, preventing unauthorized vehicle starts. It's recommended to perform this step regularly as part of your regular inspections of the vehicle to ensure the system is working correctly.
After the installation has been completed, you are now able to start driving your vehicle with confidence. The Ghost will protect your vehicle from would-be car thieves. It will ensure that no one will escape with your car if they do not have the correct PIN code. The Ghost can be linked to an approved Thatcham tracker that detects any attempts at theft or tampering. This will allow you to track your vehicle if it is stolen.
The Ghost can be utilized on a wide range of vehicles and is compatible with most major manufacturers. If you're interested in protecting your car using this advanced device, contact Monty's Locksmith today to learn more about our installation and service options. We are a TASSA registered installer, which assures us that we follow strict guidelines for installing our products. This assures customers insurance companies, customers, and law enforcement agencies that installations are done safely and correctly.