Ghost Immobiliser Fitting
Guard your vehicle against key theft, cloning, and hacking by using the first aftermarket CAN-Immobiliser. The Ghost app and GPS tracking can be connected to the immobiliser to send you alerts when your car is taken or damaged.
The installation of an Ghost immobiliser is done by a certified technician. It is important to have the right equipment and heat shrink tubing.
Getting Started
Ghost immobilisers are a great alternative to physical theft protection devices like wheel locks and car alarms. They protect your vehicle without using LED indicators or key fobs. They connect directly to the ECU CAN data network and are activated only after entering a PIN. This gives a greater level of security against key hacking, ECU swapping and cloning.
Therefore, the installation of a ghost immobiliser Birmingham has to be done with a high degree of agility and accuracy. It can be a bit like walking through a minefield; one misstep can cause serious damage to the circuits of the electrical system of your vehicle. To avoid this, it's vital that you know the installation process and prepare your vehicle for the installation process.
You'll need to take out interior panels from the vehicle to make space for your immobiliser. Once you've found the perfect place to hide it and you have it, use cable tie to ensure it is secured. Next, tidy up the wiring by tying loose wires, and then using insulation tape or heat shrink tubing to cover exposed connections. This reduces the risk of a short circuit that is not intended to happen while also improving the appearance and reducing the risk of theft.
Finally, identify a source of continuous 12V power and a grounding point for the ghost immobiliser. Once you've located them test the power cables using a multimeter. Connect the CAN H & the CAN L wires from the immobiliser with the grounding and power sources.
After you've made all the connections required, it's important to double-check them and inspect the immobiliser for indications of corrosion or damage. Also, test the system to ensure it's working correctly by entering a PIN number and then starting the engine. This should be part of your routine, as it will allow you to detect any issues that may arise early. Regular testing will help to prolong the life of your device and keep it functioning at its peak.
Preparing the vehicle
Installing a Ghost immobiliser requires knowledge and tools. A wiring diagram of the vehicle is essential for locating the correct wires and making accurate connections. A multimeter can be used to verify the electrical properties and ensure safety. Cable ties and insulation tape can be used to shield connections from being tampered with and to ensure they are secured. A user's manual is available for the Ghost Immobiliser. It will provide you with specific instructions that are tailored to your model.
Once installed, a ghost immobiliser can stop an unauthorised engine from starting by requiring the owner to enter a unique PIN sequence by pressing buttons on the steering wheel or centre console. This can be done manually or remotely via an app for mobile phones, and the code can be altered by the owner of the vehicle at any time. The device also functions quietly and is undetectable to thieves as it does not emit radio frequency.
A ghost immobiliser is directly connected to the CAN bus of the vehicle, a network which communicates with the electronic control units (ECUs) of the vehicle. It intercepts the signals transmitted by ECUs and then blocks the engine if a false one is identified. The system is tamperproof and weatherproof, with no key fobs or LED indicators to draw the attention of thieves.
It can be placed behind the dashboard or in a discreet location, so that it isn't visible to thieves and doesn't interfere with the vehicle's performance. It can be placed in a small jar, so that it is less likely to be observed by untrustworthy salespeople during a test drive.
Its low-profile operation and integration with the vehicle's CAN bus system makes it an effective deterrent against modern methods of theft, like key cloning and signal relay attacks. Combining the system with other security measures will create a formidable barrier that will deter even the most persistent of thieves. This is why more and more insurance companies are now suggesting or even requiring ghost immobilisers to be installed, since they can drastically reduce monthly premiums.
Making the Connections
Unlike traditional security systems that can be heard by thieves, ghost immobilisers work silently to keep them from being aware that your vehicle has been turned on. what is ghost immobiliser block high-tech methods used to steal vehicles such as OBD port hacking. They can also be put in without causing permanent marks in your vehicle, making them an excellent option for those who are planning to sell their vehicle in the near future.
The Autowatch Ghost 2 is a immobiliser CANbus that is among the most reliable and current solutions to prevent car theft. It utilizes the CAN data network to shut down your engine and generates a pin code that only you know, so it is difficult for thieves to recognize. It can be used on various vehicles, and works with a variety of features already installed including car alarms and steering wheel locks. GPS trackers and door lock bypass.
If you decide to install a Ghost immobiliser for your vehicle, be sure to consult the wiring diagram to determine the wires that connect. Double-check the locations of these wires to ensure accuracy and mark them using labels or tape to help you keep track of them. You'll also need to find a source of constant power (12V) and a grounding point for the system. Once you have these in place, you can start to make the connections needed to complete the installation.
The ghost immobiliser won't allow your vehicle to start until you enter a pin code through the buttons of the dashboard or steering wheel. This will stop ECU hacking, key cloning, and other methods of theft from vehicles. Additionally, it can be combined with other Thatcham-approved security equipment, such as alarms and tyre clamps to provide your vehicle with an additional degree of security.
As the UK automotive aftermarket industry expands as do the options to secure your vehicle. With so many ways for thieves to break in and steal your car it's crucial to take every precaution to protect it from being taken away. This is why ghost immobilisers are very popular among responsible car owners.
Testing the System
The Ghost Immobiliser uses a CAN data network to communicate with the vehicle's ECU and prevent the engine from starting until a specific PIN code is entered. This makes it extremely difficult for thieves to steal your key fob and start your vehicle, and more difficult to disable the system through hacking into its electronic components.
Ghost Immobilisers can also be used in conjunction with GPS tracking devices that will assist you in tracking your vehicle and track it in the event of theft. This isn't an option that is commonly used in security products sold by the aftermarket, but it's a great method to enhance your security and get assurance that your vehicle is protected.
In addition to offering enhanced security in addition to providing enhanced security, in addition to providing enhanced security, the Ghost-II immobiliser provides a simple user experience by removing the requirement for additional key fobs or devices. It has an easy and intuitive PIN code entry system that seamlessly into your daily routine. Additionally, it provides modes of deactivation and other features that let you temporarily disable the immobiliser for valet parking and servicing.
Before you begin the installation process, be familiar with your vehicle's wiring and prepare the necessary tools. A basic set of tools can allow you to create precise connections. A multimeter can be used to verify electrical values. Insulation tape and heat shrink tubing are also essential for protecting connections from short circuits, while cable ties can be used to keep the wiring in place. It is also essential to work in a place which is well-lit and wear safety gear when using electrical equipment and components.
After you've completed the installation, you must test the Ghost immobiliser to ensure that it's functioning properly. First, you should try to start the vehicle without entering the PIN code. If this fails, you'll have to test the system again and conduct a more thorough inspection of the connections.
The Ghost Immobiliser, unlike other security systems, is a secret device that is not able to be recognized by thieves. It is also far more effective than physical deterrents such as wheel clamps and steering locks. It is TASSA acknowledged and approved by some insurance companies, making it a cost-effective investment that will give you the peace of mind that you deserve.